6 Port 10/100M PoE Network Switch 65W Total Power For CCTV Surveillance
| Dimensions: | 142.5×115×40mm | PoE standard: | PoE+ |
| Port speed: | 10/100M | Max PoE power: | 30W Per Port |
| Forwarding rate: | 0.89Mpps | Operating temperature: | -20 To +55°C |
| Total PoE power: | 65W | Switching capacity: | 1.6Gbps |
| Port count: | 6 (4 PoE, 2 Uplink) | MAC table: | 1K |
| High Light: | 6 Port PoE Switch with VLAN Isolation,6 Port PoE Network Switch,6 Port PoE Switch for CCTV Surveillance |
||
The ONV-H1064PLS is a 10/100M PoE switch independently developed by ONV. It features 4×10/100M RJ45 ports and 2×10/100M uplink RJ45 ports. Ports 1-4 support PoE+ standard with single-port PoE power up to 30W. As a PoE power supply device, it automatically detects and recognizes compliant power-receiving equipment and supplies power through network cables. It can power PoE terminal equipment such as wireless APs, IP cameras, VoIP phones, and video access control intercoms, meeting high-density PoE power supply requirements. Ideal for hotels, campuses, factory quarters, and small-to-medium enterprises seeking cost-effective networking solutions. Plug-and-play operation with no configuration required.
| Model | ONV-H1064PLS | ONV-H1108PLS |
|---|---|---|
| Interface Characteristics | ||
| Fixed Port | 4×10/100Base-TX PoE ports (Data/Power) 2×10/100Base-TX uplink RJ45 ports (Data) |
8×10/100Base-TX PoE ports (Data/Power) 2×10/100Base-TX uplink RJ45 ports (Data) |
| Ethernet Port | Port 1-6 support 10/100Base-TX auto-sensing, full/half duplex MDI/MDI-X self-adaption | Port 1-10 support 10/100Base-TX auto-sensing, full/half duplex MDI/MDI-X self-adaption |
| Function Switch | When switched to 250m position: ports 1-4 support 10M/250m transmission and VLAN isolation When switched to 100m position: ports 1-4 support 100M/100m transmission, VLAN isolation off |
When switched to 250m position: ports 1-8 support 10M/250m transmission and VLAN isolation When switched to 100m position: ports 1-8 support 100M/100m transmission, VLAN isolation off |
| Twisted Pair Transmission | 10BASE-TX: Cat5 or later UTP (≤250 meters) 100BASE-TX: Cat5 or later UTP (≤100 meters) |
|
| Chip Parameter | ||
| Network Protocol | IEEE802.3 10BASE-T, IEEE802.3i 10Base-T, IEEE802.3u 100Base-TX IEEE802.3x | |
| Forwarding Mode | Store and forward (Full wire speed) | |
| Switching Capacity | 1.6Gbps (non-blocking) | 2Gbps (non-blocking) |
| Forwarding Rate@64byte | 0.89Mpps | 1.488Mpps |
| MAC | 1K | 2K |
| Buffer Memory | 768K | 1.25M |
| LED Indicator | Power: PWR (Green), Network: Link(Yellow), PoE: PoE (Green), Function switch: 100m/250m (Green) | |
| PoE & Power Supply | ||
| PoE Port | Port 1-4 | Port 1-8 |
| Power Supply Pin | 1/2(+) 3/6(-) | |
| Max Power Per Port | 30W, PoE+ | |
| Total PWR/ Input Voltage | 65W/ (AC100-240V) | 120W/ (AC100-240V) |
| Power Consumption | Standby<3W, full load<65W | Standby<5W, full load<120W |
| Power Supply | Built-in power supply, AC100~240V 50-60Hz, 1.0A | Built-in power supply, AC100~240V 50-60Hz, 2.0A |
| Physical Parameter | ||
| Operation Temp/ Humidity | -20~+55°C, 5%~90% RH non-condensing | |
| Storage Temp/ Humidity | -40~+75°C, 5%~95% RH non-condensing | |
| Dimension | 142.5×115×40mm | 195×130×40mm |
| Net /Gross Weight | 0.55kg/0.8kg | 0.75kg/1.0kg |
| Installation | Desktop, Wall mounted | |
| Certification & Warranty | ||
| Lightning Protection | Lightning protection: 4KV 8/20us, Protection level: IP30 | |
| Certification | CE mark, commercial, CE/LVD EN62368-1, FCC Part 15, RoHS | |
| Warranty | 1 year, lifelong maintenance | |

- Support non-blocking wire-speed forwarding for smoother transmission
- Support full-duplex based on IEEE802.3x and half-duplex based on Backpressure
- Provides 6×10/100Base-TX RJ45 ports for flexible networking
- 4×10/100Base-TX RJ45 ports meeting security monitoring, teleconferencing, and wireless coverage needs
- Complies with PoE+ power standard, automatically identifies PoE devices
- Single port max PoE output power: 30W
- EXTEND mode (250m): When switched to 250m position, ports 1-4 operate at 10M with transmission distance up to 250 meters
- VLAN isolation mode (250m): Enabled with EXTEND mode, ports 1-4 isolated from each other but communicate with ports 5-6
- CE, FCC, and RoHS certified
- Plug and play operation with no configuration required
- User-friendly LED indicators for PWR and PoE status
- Low power consumption with galvanized steel shell for excellent heat dissipation


| Model | Description | Built-in Power Supply |
|---|---|---|
| ONV-H1064PLS | PoE switch with 6×10/100M RJ45 ports. Port 1-4 support PoE+ standard. When switched to 250m position, ports 1-4 support 10M/250m transmission and VLAN isolation. | 65W/52V |
| ONV-H1108PLS | PoE switch with 10×10/100M RJ45 ports. Port 1-8 support PoE+ standard. When switched to 250m position, ports 1-8 support 10M/250m transmission and VLAN isolation. | 120W/52V |
Note: Mounting ears not included by default and must be purchased separately.
| Packing List | Qty | Unit |
|---|---|---|
| 6-port 10/100M PoE switch | 1 | Set |
| AC Power Cable | 1 | PC |
| User Guide | 1 | PC |
| Warranty Card and Certificate of Conformity | 1 | PC |
-
111
