60W 12V DC DIN Rail Industrial Power Supply with Corrosion Resistant Housing
| Output Voltage: | 12V DC | Output Current: | 5A |
| Output Power: | 60W | Input Voltage: | 90~264VAC |
| Frequency Range: | 47Hz~63Hz | Efficiency: | >85.0% @115Vac, >88% @230Vac |
| Output Current Range: | 0-5.0A | Ripple Noise: | Peak-to-peak Value ≤200mV |
| High Light: | 60W Industrial DIN Rail Power Supply,12V DC Din Rail Mounted Power Supply,60W Din Rail Power Supply 12vdc |
||
The GWS-DP60-12 is an economical 60W DIN Rail industrial power supply conforming to German industrial standards. Suitable for installation on TS-35/7.5 or TS-35/15 rails, it features a full-range AC input from 90Vac to 264Vac and complies with EN61000-3-2 standards for EU-specified harmonic current specifications.
Constructed with highly flame-retardant plastic housing for safety, robustness, and durability. The design incorporates natural air convection with ventilation holes at the bottom and top to facilitate internal airflow, achieving 88% conversion efficiency. This extends the power supply's lifespan and enables operation in harsh environments from -40°C to +70°C.
Features comprehensive protection including short-circuit, overcurrent, and overvoltage protection, making it suitable for various inductive or capacitive load applications. With complete protection functions and compliance with industrial control equipment certifications, it offers a highly competitive power supply solution for industrial applications.
| Model | GWS-DP60-12 |
|---|---|
| Output | |
| Group of Output | 1 |
| Rated Output Voltage | 12VDC |
| Factory Set Output Voltage | 11.4-12.6VDC (Vin: 220Vac / LOAD: 0A) |
| Output Rated Current | 5.0A |
| Output Current Range | 0-5.0A |
| Rated Output Power | 60W |
| Total Peak Output Power | 80 W (Sustained for 10 seconds at 220 VAC) |
| Peak Output Current | 6.66A (Sustained for 10 seconds at 220 VAC) |
| Ripple Noise | Peak-to-peak value ≤200mV |
| Output Voltage Adjustment Range | 11.8-14.2VDC |
| Stabilized Voltage Precision | ±5% (12.4VDC-12.6VDC) |
| Line Regulation | ±1% (@90-264Vac input, 0-100% load) |
| Load Regulation | ±5% (@90-264Vac input, 0-100% load) |
| Output Start-up Time | <3.0S @nominal input (100% load) |
| Output Hold-up Time | >20ms@115Vac, >100ms @ 230Vac (100% load) |
| Voltage Overshoot | ≤10% |
| Input | |
| Input Voltage Range | 90-264VAC |
| Rated Input Voltage Range | 100-240VAC |
| Frequency Range | 47Hz-63Hz |
| Rated Frequency | 50Hz/60Hz |
| Starting Voltage | 90VAC |
| Efficiency | >85.0%@115VAC, >88.0%@ 230VAC |
| Input Current | <1.50A@115VAC, <0.80A@ 230VAC |
| Start Inrush Current | <40A@ 115VAC, <50A@230VAC |
| Power Factor | >0.5 (at full load) |

- 90~264VAC input
- 100% full load aging test
- Meets safety and EMC standards
- High efficiency, long life, and high reliability
- Operating temperature range: -40℃~+70℃
- Protection functions: short circuit/overload/overvoltage
- Factory automation
- Industrial control systems
- Electromechanical equipment
- Semiconductor manufacturing equipment
1. All specifications and parameters were measured at an input of 230 VAC, rated load, and an ambient temperature of 25°C.
2. Ripple and noise measurement method: Use a 12' twisted-pair cable with 0.1 μF and 47 μF capacitors connected in parallel at the terminals; measurements were taken at a bandwidth of 20 MHz.
3. Accuracy: Includes setting error, linear regulation, and load regulation.
4. The power supply should be considered part of the system. Electromagnetic compatibility verification must be performed in conjunction with the terminal equipment.
